Barco UDX Series - Alignment of Projector in the Rigging Frame

R5906113 /09 UDX 55
4.9 Alignment of projector in the rigging frame
How to skew the projector?
1. Turn the skew knob at the back (reference 1) to skew the projector.
1
Image 4-15
How to tilt the projector?
1. Turn the tilt adjustment knob at the back (reference 1) to lift the projector up or down.
1
Image 4-16
How to rotate the projector?
1. Turn the rotate adjustment knob on the left side (reference 1) to rotate the projector.
1
Image 4-17
Installation procedures