R5906113 /09 UDX 83
8.4 Removal of the small top cover
Required tools
7 mm flat screw driver
How to remove
1. Loosen the two captive screws (reference 1) of the small top cover at the back side of the projector.
Image 8-4
Caution: Only loosen the captive screws at the backside of the projector. It is not necessary to loosen
the captive screws at the front side of the top cover.
2. Flip the small cover open and remove it carefully.
Image 8-5: Flip the small top cover
Projector covers
To Next Page
Loading...
Need help?
General
