Barco UDX Series - GUI - Image

R5906113 /09 UDX 87
8.8 Mounting the small top cover
Required tools
7 mm flat screw driver
How to mount
1. Slide the small top cover into the gapes of the large top cover (reference 1, Image 8-9).
2
1
Image 8-9
2. Flip down the cover, so that the captive screws nicely fit the inserts (reference 2).
3. Fasten the two captive screws (reference 1, Image 8-9).
1
Image 8-10
Projector covers