R5906113 /09 UDX 65
Image 5-2: Small top cover filter replacement
3. Remove the filter and clean it.
4. Install either the cleaned filter or a new filter (if the old one is no longer usable).
Caution: Take notice of the air flow direction of the filter (made visible by a label). Make sure the arrow
points towards the inside of the projector.
5. Install the small top cover again. See “Mounting the small top cover”, page 87.
Clean the metal dust filters
1. Remove most contamination with a vacuum cleaner.
2. Blow remaining dust away with compressed air in an other room or outside.
If you cannot clean the filter anymore, insert a new one.
Maintenance
To Next Page
Loading...
