Barracuda Networks NG Network Access Client SP4 - Settings

163 Barracuda NG Network Access Client - Administrator’s Guide
11.3.9 802.1X Settings
11.3.10 IEEE 802.1X Authentication
This option enables or disables the use of 802.1X authentication. When enabled, the Client will
automatically start a wpa_supplicant for all network interfaces configured to use 802.1X authentication.
To edit this option manually, modify the following registry key:
11.3.11 IEEE 802.1X DHCP Renew
When 802.1X DHCP Renew is enabled, a DHCP request packet will be sent to obtain a new IP
address, whenever a VLAN is assigned to the client computer by the switch.
To edit this option manually, modify the following registry key:
11.3.12 Allow Emergency Network Adapter Repair
This option enables the button for Emergency Network Adapter Repair in the Barracuda NG Access
Monitor -
Health Agent view. By clicking the button all network interfaces enabled to use 802.1X are
being reset and will receive a new IP if the network interface is configured to use DHCP.
To edit this option manually, modify the following registry key:
Table 11–10 Registry entry for 802.1X authentication
Item Description
Path
HKEY_USERS\.Default\Software\phion\phionvpn\settings
Key 8021XMonitor
Value (Default=1)
0 - disabled
1 - enabled
Table 11–11 Registry entry for 802.1X DHCP Renew
Item Description
Path
HKEY_USERS\.Default\Software\phion\phionvpn\settings
Key 8021XEnableDHCPRenew
Value (Default=1)
0 - disabled
1 - enabled
Option IEEE 802.1X DHCP Renew must be enabled in order to allow emergency network adapter repair.
Table 11–12
Registry entry for emergency network adapter repair
Item Description
Path
HKEY_USERS\.Default\Software\phion\phionvpn\settings