192 802.1X – Technical Guideline
To resolve this problem proceed following steps:
• Delete the corrupted configuration file
You will require elevated privileges to perform this step.
• Kill the process wpa_supplicant.exe
You will require elevated privileges to perform this step.
5.) wpa-supplicant running
A successful start of the wpa-supplicant can be verified by:
• The Process Explorer or Task Manager will show for every network interface
using 802.1X, a wpa-supplicant, named "wpa_supplicant.exe" as child process
of "phions.exe" appearing in the Process Explorer or Task Manager
• If verbose output is enabled following verbose output needs to be present in
the log files:
14.3.7 Runtime
During runtime the wpa-supplicant will re-authenticate periodically. This can be triggered either by the
Client service or the switch.
The Client service will generate the configuration file based on the template.
Table 14–8
wpa-supplicant running – phions.log
Item Output Description
802.1X [009001000001] stating that 802.1X monitoring is enabled
[009004000002] stating the authentication method (machine, user, user with
certificate)
[009002000009] 802.1x monitor created
[009001000002] reloading adapter list for wpa_supplicant
Non-ethernet adapters [009001000003] adapter found to be non-ethernet …
Virtual adapters [009001000003] found virtual adapter …
Disabled adapters [009001000003] found disabled adapter …
Active adapters [009001000004] 802.1x disabled for adapter …
Table 14–9 wpa-supplicant running – wpa_supplicant_{adapter_uid}.log
Output
CTRL: Open pipe
CTRL: ConnectNamedPipe: connection in progress
Initializing interface '{adapter_uid}' …
To Next Page
Loading...
