Installation
4-1
SECTION 4
•
••
•
INSTALLATION
GENERAL
BE3-GPR relays are delivered in sturdy cartons to prevent shipping damages. Upon receipt of the relay,
check the Model and Style Number against the requisition and packaging list for agreement. Inspect for
damage, and if there is evidence of such, immediately file a claim with the carrier and notify the Basler
Electric Regional Sales Office, your Sales Representative or Sales Representative at Basler Electric,
Highland, Illinois.
If the relay is not installed immediately, store it in the original shipping package in a moisture and dust free
environment. Performing the Operational Test Procedure is recommended prior to installation.
MOUNTING
BE3-GPRs are surface mountable behind a panel or semi-flush mounted. Overall dimensions and hole
locations for surface mounting are shown in Figure 4-1. Figure 4-2 shows overall dimensions and hole
locations for semi-flush mounting. Metric dimensions are shown in parentheses.
Figure 4-1. BE3-GPR Typical Overall Dimensions And Hole Locations (Surface Mounting)
To Next Page
Loading...
