TOC Communications 6-7
Metering Screen
This screen (Figure 6-9) provides real time metering data from the generator system. Data is displayed in
green when active and operating normally. the display changes to gray and is zero’ed out when the
generator voltage drop is below approximately 10 volts.
PT and CT ratios can be entered to correct for external Pts and Cts used on the system. PT ratios up to
100:1 and CT ratios up to 2000:1 are allowed.
To return to the setting screens, pull down the Meter menu (Figure 6-8) and select D
isable Metering.
Figure 6-9. Metering Screen
TERMINATING COMMUNICATIONS WITH THE BE3-GPR
Pull down the Communications menu and select C
lose (Figure 6-10). When you execute the Close
command, the communications and the BE3-GPR Windows
software are terminated.
Figure 6-10. Terminating Communications
To Next Page
Loading...
