Bauer Rainstar TX Plus Series - PE-Pipe Pull-Off Operations

Operating manual for BAUER RAINSTAR Series TX Plus 8
5.2 OPERATING MODE I: PE-PIPE PULL-OFF
5.2.1 Machine transport to set-up position
During transport the reel should be turned into the driving
direction and secured with the lock bolt. Cart, jack, and both
rear support legs must be lifted or withdrawn.
For lateral PE-pipe pull-off, set up the RAINSTAR on the
headland at right angles to the selected irrigation strip and
detach it from the tractor.
Adjust the undercarriage about level with the jack.
When you position the RAINSTAR make sure that the machine’s vertical axis of rotation is in the middle
of the driving lane or centred between two crop rows.
For lateral pull-off remove the lock bolt, turn the reel into the
direction of the driving lane and secure it again with the lock
bolt.
Remove transport lock bolts from support legs.