Operating manual for BAUER RAINSTAR Series TX Plus 76
22.3 SETTING THE THREADED ROD
Shift the shut-off lever into the shut-off position.
Turn the hex. nuts (6) on the threaded rod (7) apart until a spacing of 4 to 5 mm results between the shifting
gate (8) and the shut-off lever (9).
Lock the hex. nuts (6).
22.4 TESTING THE BAND BRAKE for release of the brake band
Move shut-off lever (9) to “release” position.
In this position the brake band must be lifted slightly off the brake disc. This prevents the brake band from
sticking to the brake disc!
The brake band may stick tight after a longer standstill or after the winter season. In
such case it must be loosened before you operate the system the next time. For
this purpose turn the PTO shaft shortly to the right and to the left with the hand
wheel. If you do not observe this the gearbox may break!
WARNING!
To Next Page
Loading...
