Bauer Rainstar TX Plus Series - Speed Control with Ecostar 4300; SPEED ADJUSTMENT with Mechanical Regulation ( Optional )

Operating manual for BAUER RAINSTAR series TX Plus 13
5.2.4 SPEED CONTROL WITH ECOSTAR 4300
Do not set the speed until half a PE-pipe winding has been wound up on the reel
and the pipe is already stretched.
Set the required retraction speed with the arrow keys
in the operating mode of ECOSTAR 4300.
You can readjust the speed any time while the
machine is operating.
See Retraction speed control with ECOSTAR
5.2.5 SPEED ADJUSTMENT with mechanical regulation ( Optional )
Do not set the speed until half a PE-pipe winding has been wound up on the reel
and the pipe is already stretched.
Loosen the knurled nuts that secure the adjusting lever. Set
the desired retraction speed with the adjusting lever – the
speed is indicated on the tachometer (optional equipment).
Afterwards secure the adjusting lever again with the knurled
nuts.
The drive has four speed ranges (see Functional Description on page 16).
Lever up = slower
Lever down = faster
CAUTION!
WARNING!
CAUTION!