Bauer Rainstar TX Plus Series - Setting Instructions (Gearbox G2); Brake, Rod, and Gate Adjustments

Operating manual for BAUER RAINSTAR series TX Plus 59
19 SETTING INSTRUCTIONS FOR RAINSTAR TX with gearbox G2
19.1 SETTING THE BAND BRAKE (1)
Tighten the hex. nut (2) of the band brake with the spring (3) hooked up, until spring length A = 265 – 267 mm.
19.2 SETTING THE THREADED ROD (4)
Shift the shut-off lever (5) to the shut-off position = gear stage „0“.
Turn the hex. nuts (6) on threaded rod (4) apart until a spacing of 2 - 3 mm results between the shut-off lever
(5) and the gear shift lever (7).
Then lock the hex. nuts (6).
2
3
4
5
6
7
8
9
1
-
3
22