Bauer Rainstar TX Plus Series - Shut-Off Frame (14) Adjustment; Shut-Off Rod Adjustment (20)

Operating manual for BAUER RAINSTAR Series TX Plus 62
19.6 SHUT-OFF FRAME (14) ADJUSTMENT
In the operating position the distance between shut-off frame (14) and reel (18) X = 10 mm.
Shut-of position:
Hook up the cart lift bracket (15) with the locking hook (16). Screw down the setscrew (17) to the cart lift bracket
(15) and turn it in until a spacing “X“ (see chart) results between the shut-off frame (14) and the outer reel
diameter (18). Screw down the second setscrew (17) to the cart lift bracket. Lock the setscrews (17).
Basic unit X
65 TX Plus 35
75 TX Plus 40
85 TX Plus 45
90 TX Plus 45
Grease gliding planes!
19.7 SHUT-OFF ROD ADJUSTMENT (20)
Switch into 1
st
gear. (Position “I). Screw
down the adjusting nuts (21) to the shut-off
frame (14) and turn them in until shut-off is
actuated. Lock the adjusting nuts (21)!
65 TX
85 TX
90 TX
75 TX
14
15
16
17
18
Gleitfäche fetten !
X
14
18
Gleitfäche fetten !
20
21
Grease gliding planes!