Operating manual for BAUER RAINSTAR Series TX Plus 18
But note:
When the cart is lifted and in the shut-off position, the gear-shift lever is held in “0” position and shifting is
impossible! If the PE-pipe is stretched you have to slacken it first, before engaging the next gear
Move the gear shift lever from a gear stage to the middle
position. A spring presses the gear shift lever up and
prevents fast reversing of the reel and PE-pipe by means of
the band brake. By pushing the gear shift lever down very
slowly you release the brake and slacken the PE-pipe.
Afterwards you can change into the required gear.
PTO DRIVE
If required, you can rewind the PE-pipe with the tractor and a
PTO shaft. Move the gear shift lever to zero position. A
spring presses the gear shift lever into the locking recess. In
this position the band brake is released. This gear shift lever
position serves also for PE-pipe pull-off.
To Next Page
Loading...
