Bauer Rainstar TX Plus Series - Page 78

Operating manual for BAUER RAINSTAR Series TX Plus 70
Changing between gears 1 to 4 is very easy with the gear shift lever when the turbine is rotating.
Note also the following:
If the shut-off lever is in the “PE-pipe retraction“ position, the gear shift lever is locked and cannot be shifted.
If the shut-off lever is in the “PE-pipe pull-off” position ..
or in the shut-off position,
you can shift it to the gears 1 to 4 as required.
Before shifting gears - slacken the PE-pipe!
If the shut-off lever is in the shut-off position, press the lever down slowly and carefully so that the band brake is
released and the PE-pipe slackens (see also page 15).
WARNING!