Baumalight TRL620D - User Manual

Other manuals for Baumalight TRL620D

Operator's Manual40 pages

Questions and Answers

R
Rhonda SmithSep 7, 2025
Why is my Baumalight TRL620D Utility Vehicle engine overheating?
- L
  lisa00Sep 7, 2025
  If the engine of your Baumalight Utility Vehicle overheats, several factors could be the cause. First, check if the coolant level is low and add coolant if needed. Second, the engine cooler might be clogged, requiring cleaning. Third, inspect the engine fan belt for slippage and tighten it, or replace it if damaged. Finally, a restricted air intake could be the culprit; replace the air filter and inspect the intake system.
W
William PrinceAug 22, 2025
Why is my Baumalight Compact Loader engine overheating?
- T
  thomaschristopherAug 22, 2025
  Your Baumalight Compact Loader engine might be overheating due to several reasons: the coolant level may be low, so you should add coolant; the engine cooler could be clogged, requiring cleaning; the engine fan belt might be slipping, in which case you should tighten or replace it if damaged; or the air intake could be restricted, so replace the air filter and check the intake system.
A
Alan VincentSep 4, 2025
What happens if I repeatedly exceed hydraulic system limits on my Baumalight Compact Loader?
- A
  Aaron HayesSep 5, 2025
  If you repeatedly exceed the hydraulic system limits on your Baumalight Compact Loader, ease up operation and don’t exceed the limits of the machine.
K
karen78Sep 3, 2025
How to fix Baumalight Compact Loader when engine will not crank over?
- D
  Donna JordanSep 3, 2025
  If the engine of your Baumalight Compact Loader won't crank over, replace the main fuse located inside the Lofa instrument panel. You'll need to remove the instrument panel faceplate to access the fuse. Also, check for worn or damaged wiring and repair the wires or replace the harness if necessary.
M
Mrs. Debra MarquezSep 2, 2025
What to do if Baumalight Compact Loader hydraulic cooler fan is not running?
- S
  Sandra DeleonSep 2, 2025
  Check the fan operation of your Baumalight Compact Loader. Also, check the cooler fan fuse located near the battery.
R
Richard MillerAug 31, 2025
What causes weak auxiliary hydraulic function on Baumalight Compact Loader attachments?
- A
  Alyssa RussellAug 31, 2025
  A weak auxiliary hydraulic function on your Baumalight Compact Loader attachment could be due to a clogged hydraulic filter, so replace the filter. It could also be caused by the engine throttle being set too low, so increase the engine speed.
M
Marco JenkinsAug 30, 2025
How to connect hydraulic couplers on a Baumalight Compact Loader?
- J
  Jordan ClineAug 30, 2025
  If you can't connect the hydraulic couplers on your Baumalight Compact Loader, it may be due to hydraulic pressure lock. Stop the engine and push the joystick forward to connect one coupler and pull it back to connect the other. Also, ensure the joystick is in the neutral position before starting the engine. Check for a blown fuse located near the battery and replace it if needed after unplugging the load on the receptacle. A solenoid failure can also be the reason, so test and replace the solenoid if necessary and replace the fuse. Finally, check for worn or damaged wiring and repair the wires or replace the harness if necessary, and replace the fuse.
K
Karla HayesAug 28, 2025
How to fix Baumalight Compact Loader if engine starts but no other functions operate?
- B
  brian99Aug 29, 2025
  If the engine of your Baumalight Compact Loader starts but no other functions operate, check the fuse on the circuit from the Lofa panel and replace it if necessary. The fuse is located in the harness behind the Lofa instrument panel in the engine compartment.
P
Pamela WangAug 27, 2025
How to fix a Baumalight Compact Loader boom that will not raise?
- D
  Dawn BarkerAug 27, 2025
  If the boom on your Baumalight Compact Loader won't raise, ensure the operator is standing on the operator platform and the switch is engaged, and that the park brake is disengaged. Check the fuse on the circuit from the Lofa panel, replacing it if necessary. You can find this fuse in the harness behind the Lofa instrument panel in the engine compartment. Also, check for power to the boom valve by checking if the light on the boom valve solenoid (A) connector is on with the engine stopped and the ignition switch in the on position. If the light is not on, check the fuse. If the fuse is good, check the wiring between the boom valve and fuse block.
J
Jessica RobbinsAug 27, 2025
What causes a Baumalight Compact Loader engine to crank but not start?
- N
  nancy93Aug 27, 2025
  If your Baumalight Compact Loader's engine cranks but doesn't start, it could be due to several reasons: The auxiliary hydraulic control might be turned on, so turn it off. The battery could be discharged, so charge and load test it, replacing it if necessary. It might be too cold. There could be a solenoid failure, so test and replace it if needed. Also, check for worn or damaged wiring and repair or replace the harness if necessary.