Baur Sys compact 2000 M pro - Switching on the system

Commissioning Syscompact 2000 M pro
40
/ 98 822-175-2
6.9 Switching on the system
Prerequisites
The system is earthed correctly and switched on.
Procedure
 Press the On/Off switch on the system control panel.
 The system status changes to the Ready for operation operating state.
 The green indicator light and the key illuminate.
 The status LEDs on the control panel illuminate green.
 The status LED on the IRG 2000 time domain reflectometer illuminates (mains
operation) or flashes green (battery is being charged).