Configuring and operating the system Syscompact 2000 M pro
/ 98 822-175-2
The system control panel can be used to perform all of the safety-related tasks:
Switching the system on and off
Releasing high voltage and deactivating high voltage release
In the event of an emergency, moving the system to the safe Ready for operation
operating state
Locking the system against unauthorised or unintentional operation and use
Checking whether the operational earthing has been connected correctly
10.1 Selecting the language
Prerequisite
The system is switched on.
Further information: Chapter Switching on the system (on page 40)
Procedure
1. Press the MENU key on the display.
2. Select the INSTRUMENT SETTING menu item and press the ENTER key.
3. Select the LANGUAGES menu item and press the ENTER key.
4. Select the desired language and press the ENTER key.
The display appears in the selected language.
10.2 Setting the date
Prerequisite
The system is switched on.
Further information: Chapter Switching on the system (on page 40)
Procedure
1. Press the MENU key on the display.
2. Select the INSTRUMENT SETTING menu item and press the ENTER key.
3. Select the DATE menu item and press the ENTER key.
4. Adjust the date and press the CONT. key.
The date is saved and the main menu appears.
ONFIGURING AND OPERATING THE SYSTEM
To Next Page
Loading...