Syscompact 2000 M pro Index
822-175-2 93 / 98
A
About acoustic pin-pointing • 72
About cable testing • 49
About the ICM method • 64
About the SIM/MIM method • 59
About the TDR method • 53
About this manual • 7
Acoustic pin-pointing • 72
Adjusting the colours of the display
elements • 44
Applicable documents • 7
Available TDR methods • 54
Avoiding dangers, taking safety
measures • 11
C
Cable fault pre-location • 52
Cable testing • 49
Checking and cleaning the
connection cables and accessories •
83
Checking and maintaining the safety
devices • 12
Checking and replacing the fuse in
the TDR connection cable (IRG 2000)
• 86
Checking the ignition voltage of the
spark gap • 80
Checks to perform before
commissioning • 33
Cleaning system components • 84
Commissioning • 33
Configuring and operating the IRG
2000 • 43
Configuring and operating the system
• 46
Connect the high-voltage connection
cable to the test object. • 35
Connecting • 35, 38
Connecting the system to the supply
voltage • 39
Connecting the TDR connection cable
to the test object (IRG 2000) • 37
Connection diagrams • 35, 38
D
Danger during the system’s surge
mode • 14
Dangers from road traffic • 16
Dangers when working with high
voltage • 12
Declaration of conformity for the IRG
2000 • 92
Declaration of conformity for the
Syscompact 2000 M pro • 91
Declarations of conformity • 91
Discharging • 76
Discharging and earthing the test
object • 76
Displaying system information • 48
Displaying three traces • 58
Disposal • 90
E
Earthing • 77
Ensure the following when
transporting • 31
Ensuring there is no voltage at the
work place • 33
Error display on the system control
panel • 87
Error messages in the system display
• 88
Evaluating reflection images with
cursors • 44
NDEX
To Next Page
Loading...