Baxi POWER HT+ Series Installation And Service Manual

C
Copying a time range
Note
It is possible to copy a time range from one day to another. It is
not possible to copy a time range from a period of several days.
1. Select a heating circuit.
See
Selecting a heating circuit, page 95.
2. Press the
MENU
key to access the parameters.
3. Select the T
Time central heating CH1
menu by turning the button.
Note
For heating circuits 2 and 3, select the parameters T
Time central
heating CH2
or T
Time setting 3/CHP
.
For the domestic hot water circuit, select the parameter T
Time
hot water
.
4. Confirm the menu selection by pressing the button
.
The parameter S
Select days
(500, 520, 540 or 560) is displayed.
5. Confirm the menu selection by pressing the button
.
The current selection flashes.
6. Select a day.
Note
It is possible to copy a time range from one day to another. It is
not possible to copy a time range from a period of several days.
See
Timer programming, page 98.
7. Confirm the menu selection by pressing the button
.
8. Select a predefined or customised time range.
See
Selecting a timer programme, page 99.
Customising the time ranges, page 100.
9. Select the parameter C
Copy?
(515, 535, 555 or 575) by turning the
button.
10. Confirm the menu selection by pressing the button
.
The parameter C
Copy to
is displayed.
Fig.
125
MW-3000071-EN-02
MENU
---------------------------------------------------
-
Information
Set time and date
Fig.
126
MW-3000138-EN-02
MENU
Mon
Time central heatin
g
CH1
Select da
y
s
Fig.
127
MW-3000139-EN-02
MENU
Co
py
?
Time central heatin
g
CH1
Monda
y
9 Settings
7609474 - v02 - 04092014 103

Baxi POWER HT+ Series Specifications

General

Model	POWER HT+ Series
Category	Boiler
Installation Type	Wall-mounted
Heat Exchanger Material	Stainless Steel
Warranty	2 years
Fuel Type	Natural Gas
Control System	Integrated Control
Ignition Type	Electronic