Baxi POWER HT+ Series Installation And Service Manual

11. Select a target day by turning the button.
12. Confirm the menu selection by pressing the button
.
N
Note
Repeat the copy to other days if necessary.
Press the
MENU
key to return to the main screen.
Reset the timer programmes to zero
1. Press the
MENU
key to access the parameters.
2. Select the T
Time central heating CH1
menu by turning the button.
Note
For heating circuits 2 and 3, select the parameters T
Time central
heating CH2
or T
Time setting 3/CHP
.
For the domestic hot water circuit, select the parameter T
Time
hot water
.
3. Confirm the menu selection by pressing the button
.
The parameter S
Select days
(500, 520, 540 or 560) is displayed.
4. Select the parameter D
Default values
(516, 536, 556 or 576) by turn
ing the
button.
5. Confirm the parameter selection by pressing the
button.
The parameter N
No
flashes.
Fig.
128
MW-3000140-EN-02
MENU
TuesdayCo
py
to
Time central heatin
g
CH1
Monda
y
Fig.
129
MW-3000071-EN-02
MENU
---------------------------------------------------
-
Information
Set time and date
Fig.
130
MW-3000141-EN-02
MENU
No
Time central heatin
g
CH1
Default values
9 Settings
104 7609474 - v02 - 04092014

Baxi POWER HT+ Series Specifications

General

Model	POWER HT+ Series
Category	Boiler
Installation Type	Wall-mounted
Heat Exchanger Material	Stainless Steel
Warranty	2 years
Fuel Type	Natural Gas
Control System	Integrated Control
Ignition Type	Electronic