Baxi POWER HT+ Series User Manual

11. Remove the assembly comprising the fan, Venturi, burner and gas
valve to access the inside of the heat exchanger.
POWER HT+ 1.200 and POWER HT+ 1.250
1. Switch off the mains supply to the boiler.
2. Close the gas inlet valve.
3. Close the valves on the heating circuits.
4. Access the internal boiler components.
5. Disconnect the power and command cables on the fan.
Fig.145
11
MW-2000787-02
Fig.146
MW-2000804-01
5
11 Maintenance
108 POWER HT + 7702630 - v02 - 11082018

Baxi POWER HT+ Series Specifications

General

Model	POWER HT+ Series
Category	Boiler
Installation Type	Wall-mounted
Heat Exchanger Material	Stainless Steel
Warranty	2 years
Fuel Type	Natural Gas
Control System	Integrated Control
Ignition Type	Electronic