Baxi POWER HT+ Series - Page 113

4. Vacuum up the remaining residue.
5. Rinse with clean water.
Warning
Do not rinse the deflector insulation.
6. Spray with white vinegar or a cleaning product suitable for stainless
steel.
Warning
This step must be carried out if there is a high level of fouling, and
may be repeated several times.
7. Leave to work for 3 to 5 minutes.
8. Clean using a nylon brush.
Warning
Only use a nylon brush. Do not use a metal brush. Using a metal
brush will irreparably damage the heat exchanger.
Fig.158
4
MW-2000791-01
Fig.159
5
MW-2000792-01
Fig.160
MW-2000793-01
6
7
5’
Fig.161
MW-2000794-01
8
11 Maintenance
7702630 - v02 - 11082018 POWER HT + 113