Baxi POWER HT+ Series - Page 119

2. Connect the cleaning pump to the valves.
3. Open the valves.
4. Descale using a suitable product.
5. Flush through a neutralisation and passivation product.
6. Rinse the plate heat exchanger with water until a pH of between 6 and
9 is reached.
Fig.174
MW-4000287-1
2
Fig.175
MW-4000288-1
3
Fig.176
MW-4000289-1
4
Fig.177
MW-4000290-1
6
11 Maintenance
7702630 - v02 - 11082018 POWER HT + 119