CAMP/MG208/20-0006 AK 98 Independent Home Dialysis System 22
Start the Treatment (Section 4.2.13)
Once dialysis has been established, it is important to check several factors:
1. Check that the blood path on the flow diagram is lit and that the time
clock has started to count down.
2. Increase pump speed slowly using the Blood Pump Up/Down keys
while observing venous and arterial pressures. The venous and arterial
alarm limits will automatically centralize.
Your desired blood flow is _mL per min.
3. Press the flashing Ultrafiltration button to start ultrafiltration.
Note : The arterial and venous pressure limits
will centralize automatically after 15 seconds of
stable blood flow.
To Next Page
Loading...
Need help?
General
