Preparing for Treatment (Section 4.2.1)
1. Ensure the WRO 300 H is connected to the main water supply
and that the water supply is turned on.
2. Ensure the drain pipe is securely in the drain.
3. Check to ensure rinse light is not on, and the RO disinfect is
completed properly.
4. Ensure the main power to the WRO 300 H and AK 98 machine
are turned on.
5. Ensure all fluid and drain tubes are connected.
6. Ensure hands have been washed, and room has been prepared.
7. Ensure all supplies are available.
CAMP/MG208/20-0006 3AK 98 Independent Home Dialysis System
To Next Page
Loading...
Need help?
General
