baxter PCA II - Syringe Holder; Routine Maintenance; Service Checks; Pusher Block

Routine Maintenance
Service Checks
The pump design includes extensive self-check procedures
which continually monitor the pump operation. The user is
usually unaware char these checks are being performed. When-
ever a fault condition is detected, the appropriate alarm is
triggcred— visual and audible— and pump operation is halted
until the error is corrected.
We secommend periodically performing the following tests:
© Power-up
+ Attention light
* Pusher block
© Syringe holder
Refer to Cartridge Operator's Manual(s) for additional service
checks.
Make sure a cartridge is installed in the pump before starting the
tests.
IMPORTANT No tests should be pei
patient.
formed when the pump is connected to a
Ifa pump fails a test, repeat the test twice.
Tf the pump still fails the test, call the Baxter Anesthesia Service
Department for a service authorization number and the
procedure for returning a pump for repair at 1-800-343-0366.