baxter PCA II User Manual

Serup
Installing the Syringe
The syringe only firs into the syringe holder as follows.
+ Squeeze the release lever, as shown in Figure 2-3, and slide the
pusher block as far as possible to the top of the pump.
Figure 2-3 + Sliding the pusher block to the top of the pump
* Place the syringe barrel on the syringe holder making sure the
barrel flange is aligned with the flange slot.

baxter PCA II Specifications

General

Brand	baxter
Model	PCA II
Category	Water Pump
Language	English