baxter PCA II - Page 24

Serup
* Push the syringe into the holder. Make sure the syringe body
is parallel to the pump, as shown in Figure 2-4. L
Figure 2-4 * Placing the syringe into the holder i
WARNING | Make sure the flange on the syringe barrel is properly placed
in the slot of the syringe holder and the plunger flange is +!
engaged by the anti-siphon latch, otherwise uncontrolled
emptying of the syringe may occur. Uncontrolled emptying of
the syringe may result in patient injury.