BA series pumps
Warnings and safety instructions 1401
3.4
When the work is complete, all the safety provisions and protective measures must be reinstalled and
made operative.
Review the operating instructions before restarting the pump or pump unit.
3.7 Training and knowledge level of personnel
The company management must ensure that all the maintenance, inspection and installation work is
performed by authorised and qualified personnel who possess the required level of knowledge
concerning the BBA pump.
The responsibilities of the concerned personnel and the personnel responsible for their supervision
must be explicitly defined by the company management. If the personnel have insufficient knowledge,
the company management must arrange for suitable training, provided by the supplier or manufacturer
of the pump.
The company management must also ensure that the content of this manual is clear to all employees
who work with/on the pump.
3.8 Environmental protection
Pollution poses a serious threat to the environment. The following rules must be observed to prevent
environmental pollution:
– Check the pump and the connected piping for leaks on a regular basis.
– If an external fuel tank is used, the connections and routing of the piping must be checked carefully.
If the piping is connected incorrectly or is susceptible to damage (leakage), this can harm the
environment.
– Do not dispose of any environmentally harmful substances in drains, sewers or on the ground. This
is illegal and punishable.
– Keep environmentally harmful substances separate and submit them to a designated disposal facility
for processing or destruction.
– Maintain the pump or pump unit in accordance with the instructions.
3.9 Designations on the pump or pump unit
Symbols are applied to the pump or pump installation as applicable to the specific version.
Make sure these symbols are and remain legible.
To Next Page
Loading...
Need help?
General
