BA series pumps
1401 Receiving, transport and storage
4.1
4 Receiving, transport and storage
4.1 Receiving
Carefully check the pump or pump unit upon receipt for any damage that may have occurred during
transport. Check whether the shipment matches the bill of lading.
Report any damage or incomplete shipment to the transporter straight away. The transporter must
immediately note this on the shipping documentation.
4.2 Transport
WARNING
Only use certified lifting equipment with an adequate lifting capacity and always lift
from directly above. Lifting from an angle can lead to dangerous situations.
Lifting work may only be performed by appropriately authorised personnel.
Because many different versions of the pump or pump installation are available,
only general instructions are provided. See the specification sheet for the particular
pump or pump installation for the weight and dimensions.
Note
Contact BBA Pumps if you have any questions or concerns.
To prevent liquids from leaking and causing dangerous
situations during transport of the pump or pump unit, the
following precautionary measures must be taken:
– Disconnect the suction and pressure pipes from the
pump.
– If an external fuel tank was used, the fuel lines from the
external tank must be disconnected. Take necessary
measures to capture any draining fuel.
– Drain any liquid that is present in the pump or pump unit.
– Flush the pump or pump unit.
– Drain the drip tray under the tank via the drain plugs.
To Next Page
Loading...
Need help?
General
