BA series pumps
Pump unit installation 1401
5.1
5 Pump unit installation
5.1 Placement – general
Note
Instructions for connecting the drive system to a separate pump are provided in the installation
instructions.
WARNING
Failure to follow the guidelines for the placement and installation of the pump unit
can result in danger to the user and/or severe damage to the pump or pump unit.
BBA Pumps is not responsible for accidents and damage that result from failure to follow the guidelines
in this manual. Such use results in forfeiture of the right to assert any warranty or damage
compensation claims.
Note
Because many different versions of the pump unit are available, only general instructions are provided.
See the specification sheet for the particular pump unit for technical data.
Contact BBA Pumps if you have any questions or concerns.
– Place the pump unit on a flat surface capable of supporting the load.
To Next Page
Loading...
Need help?
General
