HB-37350-810-01-51F-EN SMX Installation manual.docx Page 162 of 234
Version: 50F
5.11.2 Assignment of encoder interface
X31/X32
1)
1)
only SMX12(/2)
X33/X34
2)
2)
only SMX12-2(/2)
NOTE:
With the terminals X33/X34 of the modules SMX11-2(/2) and SMX12-2(/2), the connection is
inverse to the presented and to X31/X32 with application of a incremental counting system.
With encoders not connected inversely to X33/X34, the direction of rotation is thus indicated
inversely. The indicated direction of rotation can be corrected in the software. (see.
programming manual S. 90 FF - "Direction UP/down“)
To Next Page
Loading...