BBH SMX 12-2 - 3.2 Characteristic data of device; 3.2.1 Basic modules; 3.2.1.1 SMX10;10 A;10 R;10 AR (;2,;4 x,;x(1))

Installation manual
HB-37350-810-01-51F-EN SMX Installation manual.docx Page 19 of 234
Version: 50F
3.2 Characteristic data of device
3.2.1 Basic modules
3.2.1.1 SMX10/10A/10R/10AR (/2, /4x, /x
(1)
)
Type designation
Device design
Design of module with the following periphery:
14 Digital inputs
2 Pulse outputs
2 Relay outputs (6x SMX10R, SMX10AR)
2/4 pn- or pp- switching outputs
2 Auxiliary outputs
2 Analog inputs (SMX10A, SMX10AR)
1 diagnostic- and configuration interface
1 function button
1 7-segment display
1 status-LED
14 status LEDs for inputs
2 status-LEDs for pulse outputs
2 status-LEDs für relay outputs
6 status LEDs for outputs
1 Optional: Communication interface(/4x, 5x, /x
(1)
)
Characteristics of the module:
• Extendable to:
o max. 42 safe digital inputs,
o max. 12 safe digital outputs,
o max. 20 sichere digitale I/O’s,
o max. 11 safe relay outputs,
o max. 10 auxiliary outputs
• Logic processing up to Pl e acc. to EN ISO 13849-1 or SIL 3 acc. to IEC 61508
• Freely programmable Modular controller for up to 800 IL instructions
• Logic diagram oriented programming
• Pulse outputs for cross-shorting detection of digital input signals
• External contact monitoring of connected switchgear (EMU)
• Monitored relay outputs for safety relevant functions
• Switchable safe semi-conductor outputs pn-, pp- switching for safety-relevant functions
• Parameter management for expansion modules in base device
• Comprehensive diagnostics functions integrated
• Coded status display via front-side 7 segment display and status LEDs
• Multifunction buttons (quit, start, reset) can be operated from the front side
• Optional: Communication interface