BBH SMX 12-2 - 3.2.4 Communication interface; 3.2.4.1 SMX5 x

Installation manual
HB-37350-810-01-51F-EN SMX Installation manual.docx Page 45 of 234
Version: 50F
3.2.4 Communication interface
3.2.4.1 SMX5x
Type designation
Device design
Designs of the module with following peripherals:
1 SMX51 CAN 2.0
oder
SMX52 Profibus
oder
SMX53 Profinet
oder
SMX54 CANopen
oder
SMX55 EtherCAT
oder
SMX57 Devicenet
1 backplane bus interface
1 status LED for operating status
1 status LED CAN- communication
Characteristics of the module:
• Communication modules CAN or PROFIBUS or PROFINET or CANopen or EtherCAT
or DeviceNet
• 2x 8 Byte PAA with free allocation
• 32 Bit PAE
• You can take detailed information from the installation manuals of the respective field
bus modules.