BBH SMX 12-2 - 3.2.1.5 SMX12-2;12-2 A(;2,;4 x,;x(1))

Installation manual
HB-37350-810-01-51F-EN SMX Installation manual.docx Page 35 of 234
Version: 50F
3.2.1.5 SMX12-2/12-2A(/2, /4x, /x
(1)
)
Type designation
Device design
Design of module with the following periphery:
2 Axes
8 Encoder interfaces
14 Digital inputs
2 Pulse outputs
2 Relay outputs
2/4 pn- or pp- switching outputs
2 Auxiliary outputs
2 Analogue inputs
1 Diagnostic- and configuration interface
1 Function button
1 7-segment display
1 status-LED
14 status LEDs for inputs
2 status-LEDs for pulse outputs
2 status-LEDs for relay outputs
6 status LEDs for outputs
1 Optional: Communication interface(/4x, 5x, /x
(1)
)
Characteristics of the module:
Extendable to:
o max. 42 safe digital inputs,
o max. 12 safe digital outputs,
o max. 20 safe digital I/O,
o max. 9 safe relay outputs,
o max. 10 auxiliary outputs,
o max. 2 safe axes
• Logic processing up to PL e EN ISO 13849-1 or SIL 3 acc. to IEC 61508
• Movement monitoring of one or two axes up to Pl e EN ISO 13849-1 or SIL 3 acc. to
IEC 61508
• Speed monitoring
• RPM-monitoring
• Standstill monitoring
• Sense of rotation monitoring
• Safe incremental dimension
• Emergency Stop monitoring
• Position monitoring
• Position range monitoring
• Trend range monitoring
• Target position monitoring
• Freely programmable Modular controller for up to 800 IL instructions
• Logic diagram oriented programming
• Pulse outputs for cross-shorting detection of digital input signals
• External contact monitoring of connected switchgear (EMU)
• Monitored relay outputs for safety relevant functions