BD PrepMate Automated Accessory - Page 26

BD PrepMate™ Instrument User’s Manual
26
HORIZONTAL IN FAULT
Troubleshooting
• Turn off the instrument. Pull out tray; turn on the instrument again.
HORIZONTAL OUT FAULT
Troubleshooting
• Turn off the instrument. Push in tray; turn on the instrument again.
OTHER FAULTS
Should any of the following faults occur or messages appear on the screen, call 
Becton,
Dickinson and Company Technical Support.
• Horizontal Position Fault
• Vertical Top Fault
• Vertical Mid Fault
• Vertical Bottom Fault
• Plunger Driver Fault
• Rear Travel Limit
• Draw Sensor Fault
• Draw Sensor or Connection Failure
• Plunger Sensor Fault
• Tray accidentally moved to the rear travel position
• Fiber optic sensor heads misaligned
• Vial old-down door hinge screws loose
NOTE
If there is a loss of power to the BD PrepMate™ Automated
Acc
essory, the processor does not retain memory. The operator will
need to determine which step the process was in and restart testing
at the appropriate step.