29
Appendix: PrepMate™ Installation Instructions
A.1 About these instructions
These instructions describe the steps necessary to install the BD PrepMate™ Automated
Accessory.
The installer is expected to be either a BD PrepMate
TM
Automated Accessory user or an
authorized representative of Becton, Dickinson and Company. It is also expected that the
installer has read and understands the instructions in the BD PrepMate
TM
Automated Accessory
Operator’s Manual.
A.2 Document conventions
The following conventions are used in this document to identify important information.
• Type like this (THIS KEY) indicates a reference to a key that you press.
• Type like this (see In
troduction) is a reference to text elsewhere in these instructions.
NOTE
Gives helpful informa
tion about the BD PrepMate™ Automated
Accessory.
There are two notice types used in this reference
: a caution and a note. The appearance and
usage of each type is detailed below.
CAUTION
Indic
ates the possibility of severe equipment damage or invalid
results if instructions are not followed.
To Next Page
Loading...
