BD PrepMate Automated Accessory - Unpacking the BD Prepmate Automated Accessory

Power cord inlet
31
Figure A.2 -BD PrepMate™ Automated Accessory rear view
A.4 Unpacking the BD PrepMate™ Automated Accessory
1 Unpack all items in the shipping container.
2 V
erify that the following components are included in the shipping container:
•BD PrepMate
TM
Automated Accessory (1)
•Power cord (1)
• Specimen Racks (4) numbered 1 through 4
• One (1) Disposable Installation Kit (491288: BD Pr
epMate™ Installation Kit) containing:
• Syringing pipettes (12)
•
Empty specimen collection vials (12)
• Vial lids (12)
• Centrifuge tubes (12)
3 Open
the hold-down door and remove the foam packing that supports the gripper framework
before attempting any operation.
NOTE
Read all instruc
tions before starting.