Page vi MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)
Table of Contents
Transducer ..........................................................................................................2-11
Transducer Pressure Below Sensor Range...............................................................2-13
Transducer Pressure Above Sensor Range...............................................................2-14
Transducer Communication Error............................................................................2-14
Transducer Status Fault............................................................................................2-15
Incorrect Transducer.................................................................................................2-16
Transducer Program Errors ......................................................................................2-16
Transducer Wiring Error...........................................................................................2-17
Area Alarm Program Errors .....................................................................................2-18
Area Alarm Module RAM Error..............................................................................2-18
Area Alarm Module ROM Error..............................................................................2-19
Battery Low on Master Alarm..................................................................................2-19
Ethernet Connection Is Lost.....................................................................................2-20
Area Display/Transducer Fault ...............................................................................2-21
Service Required .....................................................................................................2-22
Gas or Vacuum Wrong Gas .....................................................................................2-22
Gas or Vacuum Wiring ............................................................................................2-23
Gas or Vacuum Shorted ...........................................................................................2-23
Gas or Vacuum Lost ................................................................................................2-24
Serial Number Lost (Master Alarm) ........................................................................2-25
Serial Number Lost (30-Point Master Alarm with Three Area
Alarm Modules) ......................................................................................................2-26
Connection Lost with Device: Device Name...........................................................2-27
Comms (Serial Number) Lost Area SN: Serial Number..........................................2-28
Data Link Lost with Device: Device Name.............................................................2-29
No LEDs or Displays Are Lit on the Area Alarm....................................................2-30
No LEDs Are Lit, and the Display Is Off on the Master Alarm..............................2-32
No LEDs Are Lit on the Local Alarm......................................................................2-34
No Display on One Area Alarm Module..................................................................2-36
Audible Signal Does Not Silence.............................................................................2-36
No Audible Signal on the Master Alarm..................................................................2-37
No Audible Signal on the Area Alarm .....................................................................2-37
No Audible Signal on the Local Alarm....................................................................2-38
To Next Page
Loading...
