Page 1-60 MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)
Master Alarm Power-Up
Chapter 1: Introduction
Master Alarm Power-Up
Tools required: 5/32" hex wrench
1. Using a 5/32" hex wrench, unlock the front panel (DE) (see figure 1-17 on
page 1–60).
Figure 1-17. Master Alarm
2. Turn the power switch (DC) to the ON position.
The Master Alarm displays the following in two second intervals:
Booting
BeaconMedæs
TotalAlert System
Version: #.##
SN: #####
Browse at http://
Master#####
To Next Page
Loading...
