66
Radio mode
Switching on:
X Switch on TP menu.
X Press multifunction button re-
peatedly until
TP on appears.
Switching off:
X Switch on TP menu.
X Press multifunction button re-
peatedly until
TP off appears.
TP is switched off after returning to nor-
mal display.
Selecting automatic tracking
In all modes and wavebands, automatic
tracking can be turned on by pressing
and holding the button for more than
2 seconds.
In the TP menu:
X Press multifunction button re-
peatedly until
TP on appears.
Selecting / cancelling direct
programming
X Switch on TP menu.
Selecting:
X Press the multifunction button.
X Using the right-hand rotary
control , select the desired TP sta-
tion and press to confirm.
After a short delay and without actua-
tion, the selected station is accepted.
Cancelling:
X Press the multifunction button.
X Select Autoselect with the right-
hand rotary control and press the
control to confirm.
After a short delay and without actua-
tion, direct programming is cancelled.
Attention:
If a TP station has already been pro-
grammed directly, it will once again be
selected as the TP station.
To Next Page
Loading...
