67
Radio mode
Switching mute on/off
X After selection of a TP or EON
station, the mute function can be
activated by pressing the button
briefly.
Thereafter, only traffic announcements
and navigation announcements will be
switched through.
X The mute function is cancelled by
pressing the button again.
Interrupting TP announcements
An announcement currently being
broadcast can be interrupted.
X Briefly press the button during the
TP announcement.
The unit switches back to the previously
selected mode.
TP announcement volume
X Select TP menu.
X Press the multifunction button.
X With the right-hand rotary control ,
four different settings (
0 - 3) can be
selected.
This means that the volume can be
raised by a fixed amount depending on
the setting.
• Setting
0 - no increase
• Setting
1 - slight increase
• Setting 2 - moderate increase
• Setting
3 - large increase
Telephone muting
If a telephone is installed in the vehicle
and its mute control is linked to the car
radio, the User menu (page 84) can be
used to determine how it should behave.
If
Mute is selected, the radio is muted
when a call is received.
With the setting
Audio Sig. the
sound of the telephone will be heard
through the radio unit if a call comes in
(vehicle ignition must be on).
This is only possible if, in addition to the
telephone, a hands-free unit with loud-
speaker output is installed and connect-
ed to the radio. In both cases
Phone will
be displayed.
To Next Page
Loading...
