For your safety
CP39xx6 Version: 3.6
2 For your safety
The safety chapter explains the safety symbols used and their meanings. They contain fundamental safety
instructions that are essential for the avoidance of personal injuries and damage to property.
Exclusion of liability
Beckhoff shall not be liable in the event of non-compliance with this documentation and thus the use of the
devices outside the documented operating conditions.
2.1 Signal words
The signal words used in the documentation are classified below.
Warning of personal injuries
DANGER
Hazard with high risk of death or serious injury.
WARNING
Hazard with medium risk of death or serious injury.
CAUTION
There is a low-risk hazard that can result in minor injury.
Warning of property and environmental damage
NOTE
There is a possibility of damage to the environment, equipment or data.
2.2 Intended use
The CP39xx multi-touch Control Panel is designed for industrial applications in machine and systems
engineering. A display with multi-finger touch screen is installed in the housing. The panel is integrated into
the system or the machine via the mounting arm.
The DVI/USB extension technology integrated in the CP39xx-0000 Control Panel enables the panel to be
located up to 50m away from the PC.
The CP-Link 4 technology integrated in the CP39xx-0010 Control Panel enables the panel to be located up
to 100m away from the PC via a CP-Link 4 cable with optionally integrated or separate 24V power supply,
depending on the transmitter module.
The control panel is designed for a working environment that complies with protection rating IP65. It offers
full protection against contact and against water jets (nozzle) from any angle and against dust. The specified
limits for technical data must be adhered to.
The control panel can be used within the documented operating conditions.
Improper use
Do not use the device outside the documented operating conditions.
To Next Page
Loading...
Need help?
General
