GB Sound speed controller SFR-1
06.02.2019 BEIER-Electronic 63
Configuration - S-BUS / SUMD
S-BUS / SUMD
If sum signals should be used, they must be activated here. The sum signal channel
of the receiver is connected to proportional channel #6 (X2/6) of the SFR-1. Each
sum signal channel can be assignet to a proportional channel in the Sound-Teacher
(see page 34).
Configuration - S-BUS / SUMD - Digital switches (only for Graupner SUMD3)
The 64 digital switches of the sum signal SUMD3, the desired functions can be
assigned here. Please follow the instructions on page 35.
To Next Page
Loading...
