GB Sound speed controller SFR-1
64 BEIER-Electronic 06.02.2019
Configuration - Proportional channels
Assignments and thresholds for proportional channel #2 - #6
For proportional channel #2 - #6, the ranges A, B, C and D can be assigned to
various functions of the SFR-1.
The left picture shows five ranges of a channel. You can define the thresholds for
each range manually (see page 30) by moving the blue sliders up and down. The
number on top shows the value of each threshold.
The reset button restores the threshold standard values.
Channel reversion
The directions of the proportional channels can also be inverted. If channel #2 is
used for steering, it is not possible to assign functions or to invert it.
Activation delay
Certain times can be set that determine how long the joystick or switch must be in
the positions A/D and B/C in order to activate the corresponding functions. Times
between 10 and 2500 ms are possible.
However, the values defined here are always valid for all proportional channels. It is
not possible to define delays for one channel separately.
The reset button will restore standard values.
To Next Page
Loading...
