1 Function and area of use
This document provides guidelines when working with the X2/BoX2 series range of products
with embedded CODESYS runtime.
2 About this Startup document
This Startup document should not be considered as a complete manual. It is an aid to be able to
Startup a normal application quickly and easily.
Use the following software and drivers in order to obtain a stable application:
In this document we have used following software and hardware
- BCS Tools 3.30
- CODESYS 3.5 SP13 patch 3
- iX Developer 2.40 SP5
For further information refer to
- iX Developer Reference Manual (MAxx831) iX Developer User's Guide (MAxx832D),
Driver help in iX Developer
- CODESYS online help
This document and other Startup documents can be obtained from our homepage.
Please use the address support.europe@beijerelectronics.com for feedback about our Startup documents.
Copyright © Beijer Electronics, 2022
This documentation (below referred to as ‘the material’) is the property of Beijer Electronics. The holder or user has a non-exclusive right
to use the material.
The holder is not allowed to distribute the material to anyone outside his/her organization except in cases where the material is part of a
system that is supplied by the holder to his/her customer.
The material may only be used with products or software supplied by Beijer Electronics.
Beijer Electronics assumes no responsibility for any defects in the material, or for any consequences that might arise from the use of the
material.
It is the responsibility of the holder to ensure that any systems, for whatever applications, which is based on or includes the material
(whether in its entirety or in parts), meets the expected properties or functional requirements.
Beijer Electronics has no obligation to supply the holder with updated versions.
To Next Page
Loading...
Need help?
General
