Beijer Electronics X2 control

To Next Page

To Previous Page

X2 series with embedded CODESYS control – Recommendations and limitations

SUEN00392E 2022-03

31 (61)

Normal.dotm

, 2020-09-09

COM port mapping

Main Page

Function and Area of Use2
About this Startup Document2
Table of Contents3
BCS Tools or CODESYS5
BCS Tools 3.30 or Newer5
Codesys5
X2 Series Soft Control with CODESYS6
Installation of CODESYS Runtime X2 Control/X2 Marine Sc/Box2 Pro SC (V2.1.1 Build 906)6
Installation of CODESYS Runtime X2 Extreme Sc/Box2 Extreme SC (V2.0 Build 368)6
Installation of CODESYS Runtime X2 Control/X2 Marine Sc/Box2 Pro SC (V2.0 Build 775)7
Installation of CODESYS Runtime X2 Extreme Sc/Box2 Extreme SC (V2.0 Build 367)7
Installation of CODESYS Runtime X2 Control/X2 Marine Sc/Box2 Pro SC (V1.5.1 Build 693)8
Installation of CODESYS Runtime X2 Extreme Sc/Box2 Extreme SC (V1.2.1 Build 287)8
Installation of CODESYS Runtime X2 Control (V1.4 Build 581)9
CODESYS Device Handling >= Image V2.0 (B775/B367)9
CODESYS Runtime Version Dependencies10
Version Compatibility Chart X2 Control/X2 Marine Sc/Box2 Pro SC12
Version Compatibility Chart X2 Extreme/Box2 Extreme SC13
Persistent Function (X2 Control/Extreme, Box2 Pro Sc/Box2 Extreme SC)13
Declaration of Persistent Variables14
Boot Application16
Interrupt and Watchdog16
Performance Tuning17
Error Checking and Error Log19
Code Transparency CODESYS Vs BCS Tools21
Supported Fieldbus Combinations X2 Series22
Ethercat23
Installation23
Ethernet Port Mapping24
Image Version ≥ 1.5 Build 693 with CODESYS Runtime 3.5.13.30.4 or Newer24
Image Version 1.4 Build 581 with CODESYS Runtime 3.5.10.10.1625
Bus Cycle Task and I/O Updating26
Output Status in STOP Mode27
Performance27
Limitations and Recommended Settings28
Error Checking29
Links29
Modbus RTU30
Installation30
Cables30
COM Port Mapping31
Bus Cycle Task and I/O Updating32
Output Status in STOP Mode33
Limitations and Recommended Setting34
Error Checking34
Performance35
Dynamic Configuration and Application Triggers35
Links35
Modbus TCP36
Installation36
Ethernet Port Mapping36
Image Version ≥ 1.5.1 Build 693 with CODESYS Runtime 3.5.13.30.4 or Newer36
Image Version 1.4 Build 581 with CODESYS Runtime 3.5.10.10.1637
Bus Cycle Task and I/O Updating37
Output Status in STOP Mode38
Performance38
Limitations and Recommended Settings39
Communication with Modbus TCP to Modbus RTU Gateways39
Dynamic Configuration and Application Triggers39
Error Checking40
Links40
Canopen41
Installation41
Cables41
CAN Port Mapping44
Bus Cycle Task and I/O Updating45
Output Status in STOP Mode45
Node Guarding and Heartbeat46
Performance46
Limitations and Recommended Settings47
Error Checking48
Links48
Project Backup49
CODESYS, Create Backup Files49
CODESYS, Project Archive49
CODESYS - Source Download51
Performance52
CPU Load and Tuning52
Communication IX and CODESYS53
Driver53
Recommended Settings53
Configuration in CODESYS54
Developer56
Configuration of IX Developer56
Rename the Driver56
Import of Variables57
Parameter Setting and Help File for the Driver, CODESYS ARTI58
Download IX Project to IX Panel59
About Beijer Electronics61
Contact Us61

Other manuals for Beijer Electronics X2 control

Startup Guide19 pages

Related product manuals

Beijer Electronics X2 Series

61 pages

Beijer Electronics X2 control

Table of Contents

Other manuals for Beijer Electronics X2 control

Related product manuals