Beijer Electronics X2 control User Manual

X2 series with embedded CODESYS control – Recommendations and limitations
SUEN00392E 2022-03
30 (61)
Normal.dotm
, 2020-09-09
8 Modbus RTU
Installation
For generic installation recommendations please refer to the following link
http://modbus.org/docs/Modbus_over_serial_line_V1_02.pdf
For details of the hardware being used refer to the hardware manual
NOTE!
We always recommend to use an external tool to measure the quality of the installation of the
network. This especially important with larger networks in order to secure a well functional
installation.
Cables
CAB112
D-SUB to Open end RS-485
CAB113
D_SUB to BFI RJ45
Cables for X2 extreme SL panels please contact your local sales representive for details.

Beijer Electronics X2 control Specifications

General

Brand	Beijer Electronics
Model	X2 control
Category	Controller
Language	English