TX-1xx Series Printer Operation Manual
~ 130 ~
paper after installing the ribbon.
6. Uneven print content.
⚫ The ribbon is not installed properly, please reinstall the ribbon.
⚫ The ribbon is wrinkled. Please remove the ribbon, pull out the
ribbon core, and then tighten it again to ensure that the ribbon is
not wrinkled before installing it back into the printer.
⚫ Replace the new ribbon, please pay attention to use the ribbon
produced by EPSON.
7. The printing action looks normal, but nothing is printed.
⚫ The ribbon is installed incorrectly, reinstall the ribbon.
8. The printed content overlaps.
⚫ Paper jams, please refer to the above paper jam processing
methods to solve.
⚫ The installation direction of the printing paper is wrong, please
refer to the manual to reinstall.
⚫ Please use high-quality printing paper.
⚫ No paper shaft installed, please install paper shaft.
To Next Page
Loading...